120 Labs for Cisco CCNA 200-125 and CCENT Exams

120 Labs for Cisco CCNA 200-125 and CCENT Exams

120 Labs and solutions to give you the confidence and speed to pass the practical teste in your Cisco CCNA and CCENT exams: CCNA 200-125, ICND1 100-105, ICND2 200-105

ICND1: 100-105
1.0 Network Fundamen
Lab 1: Configure, Verify, and Troubleshoot IPv4 Addresses
Lab 2: Configure, Verify, and Troubleshoot IPv6 Addresses
Lab 3: IPv6 Address Autoconfiguration
Lab 4: ARP and Proxy ARP
2.0 LAN Switching Fundamentals
Lab 5: Configuring Standard VLANs on Catalyst Switches
Lab 6: Configuring VTP Clients and Servers on Catalyst Switches
Lab 7: Configuring VTP Transparent Mode
Lab 8: Securing VTP Domains
Lab 9: Configuring Switch Access Port Security
Lab 10: Configuring Advanced Switch Access Port Security
Lab 11: Configuring Advanced Static Switch Access Port Security
Lab 12: Disabling Auto-negotiation of Trunking
Lab 13: Setting Switchports to Dynamic
Lab 14: Configuring a Default Gateway for Routers and Switches
Lab 15: Cisco Discovery Protocol
Lab 16: Configuring LLDP
Lab 17: Configuring Errdisable Recovery
3.0 Routing Fundamentals
Lab 18: Configuring Inter-VLAN Routing (Router on a Stick)
Lab 19: Configuring and Allowing Inter-VLAN Routing—SVI
Lab 20: Configuring Static Routing via Interfaces
Lab 21: Configuring Static Routing via IP addresses
Lab 22: Configuring and Naming Static Routes
Lab 23: Configuring Default Static Routes
Lab 24: Configuring IPv6 Static Routes
Lab 25: Configuring IPv6 Default Routes
Lab 26: Configuring IP Floating Static Routes
Lab 27: Configuring RIP version 2
Lab 28: RIPv2 Automatic Summarization
Lab 29: Debugging and Verifying RIP Version 2 Updates
Lab 30: Passive Interfaces for RIPv2 Updates
Lab 31: RIPv2 Split Horizon
4.0 Infrastructure Services
Lab 32: Configuring the Cisco IOS DHCP Server
Lab 33: Troubleshooting and Configuring DHCP (Client-Server Router-Based)
Lab 34: DHCP Relay
Lab 35: Configuring a Router as an NTP Client
Lab 36: Configuring and Applying Standard Numbered
Lab 37: Configuring and Applying Standard Named ACLs
Lab 38: Configuring and Applying Extended Numbered ACLs Inbound
Lab 39: Configuring and Applying Extended Named ACLs Inbound
Lab 40: Configuring and Applying Extended Numbered ACLs
Lab 41: Restricting Inbound Telnet Access Using Extended ACLs
Lab 42: Debugging Network Traffic Using Extended ACLs
Lab 43: ACL Sequence Numbers
Lab 44: Logging ACL Matches
Lab 45: Configuring Static Network Address Translation
Lab 46: Configuring Dynamic Network Address Translation
Lab 47: Configuring Interface-based Port Address Translation
Lab 48: Configuring Pool-based Port Address Translation
5.0 Infrastructure Maintenance
Lab 49: Configuring Passwords on Catalyst Switches
Lab 50: Permitting Telnet Access to Catalyst IOS Switches
Lab 51: Permitting Telnet Access to Catalyst IOS Switches—Login Local
Lab 52: Permitting Console Access to Catalyst IOS Switches—Login Local
Lab 53: Configuring an Enable Secret Password and Exec Timeout on Catalyst Switches
Lab 54: Configuring User Privileges on Cisco IOS Devices
Lab 55: Configuring Command and Password Privilege Levels on Devices
Lab 56: Configuring MOTD Banners
Lab 57: Changing the Configuration Register on Cisco IOS Devices
Lab 58: Configuring SSH Access/Disable Telnet Access
Lab 59: Configuring IOS Device Logging to a SYSLOG Server
Lab 60: Performing an IOS Upgrade
Lab 61: Performing an IOS Upgrade Using FTP
Lab 62: Performing Password Recovery
ICND1 Challenge Labs
Challenge Lab 1: Static Routes and ACLs
Challenge Lab 2: Static Routes and ACLs
Challenge Lab 3: CDP, Banner Messages, and NTP
Challenge Lab 4: Static NAT
Challenge Lab 5: NAT Pool
Challenge Lab 6: NAT Overload
Challenge Lab 7: Static IPv6 Routes
Challenge Lab 8: Switchport Security
Challenge Lab 9: Trunking and VTP
Challenge Lab 10: DHCP, Inter-VLAN Routing, and RIPv2
ICND2 200-105
1.0 LAN Switching Technologies
Lab 63: Configuring Extended VLANs on Cisco Catalyst Switches
Lab 64: Changing the Native VLAN and Shutting Down Unused Ports
Lab 65: Restricting Extended VLANs on Trunks and Changing the VTP Version
Lab 66: Verifying Spanning Tree Port States on Catalyst Switches
Lab 67: Configuring Spanning Tree Protocol Root Bridges Manually
Lab 68: Configuring Spanning Tree Protocol Root Bridges Using the IOS Macro
Lab 69: Assigning Multiple Instances to a VLAN Simultaneously
Lab 70: Configuring Spanning Tree Protocol for Access Ports (PortFast)
Lab 71: Enabling Rapid Per-VLAN Spanning Tree
Lab 72: Configure, Verify, and Troubleshoot EtherChannels (Static/PAgP/LACP)
Lab 73: Configuring 802.1X Security
Lab 74: Configuring DHCP Snooping
2.0 Routing Technologies
Lab 75: Configuring OSPF on Point-to-Point Networks
Lab 76: Configuring OSPF on Broadcast Networks
Lab 77: Configuring the OSPF Router ID Manually
Lab 78: Configuring the OSPF Passive Interface Manually
Lab 79: Configuring Single-Area OSPFv3
Lab 80: Configuring Multi-Area OSPF
Lab 81: Debugging OSPF Adjacencies
Lab 82: Configure, Verify, and Troubleshoot Single-Area and Multi-Area OSPFv3 for IPv6
Lab 83: Configuring Basic EIGRP Routing
Lab 84: Configuring EIGRP Routing Using Wildcard Masks
Lab 85: EIGRP Automatic Summarization
Lab 86: Passive Interfaces for EIGRP Updates
Lab 87: Summarizing Routes with EIGRP
Lab 88: Verifying the EIGRP Database
Lab 89: EIGRP Split Horizon
Lab 90: Configuring EIGRP for IPv6
3.0 WAN Technologies
Lab 91: Configuring Back-to-Back Serial Connections
Lab 92: Verifying Cisco HDLC Encapsulation
Lab 93: Configuring PPP Encapsulation
Lab 94: PPP Authentication Using PAP
Lab 95: PPP Authentication Using CHAP (Method #1)
Lab 96: PPP Authentication Using CHAP (Method #2)
Lab 97: Configuring Multilink PPP (MLPPP)
Lab 98: Configuring PPPoE
Lab 99: Configuring eBGP Advanced
Lab 100: Configuring GRE Point-To-Point Tunnels
4.0 Infrastructure Services
Lab 101: Configuring IPv6 Traffic Filters
Lab 102: Implementing HSRP
5.0 Infrastructure Maintenance
Lab 103: Configuring IP SLA
Lab 104: Configuring SNMPv3
Lab 105: Configuring SNMPv2
ICND2 Challenge Labs
Challenge Lab 11: CHAP with PAP Fallback
Challenge Lab 12: Set STP Root Bridge Manually
Challenge Lab 13: Enable RSTP+
Challenge Lab 14: Easy EIGRP
Challenge Lab 15: OSPF Passive Interfaces
Challenge Lab 16: Multi-Area OSPF
Challenge Lab 17: Multi-Area OSPF with Passive Interfaces
Challenge Lab 18: OSPFv3
Challenge Lab 19: Multi-Area OSPFv3
Challenge Lab 20: Multi-Area OSPFv3 with PPP and Logging
Bonus Labs
Lab A: Configuring and Applying Extended Named ACLs Outbound
Lab B: Restricting Outbound Telnet Access Using Extended ACLs
Lab C: Configuring IOS DHCP Clients
Lab D: Configuring Command Aliases on IOS Devices
Lab E: Configuring Local Name Resolution on Cisco IOS Devices
Lab F: Configuring Domain Name Resolution on Cisco IOS Devices
Lab G: Configuring Command and Password Privilege Levels on Devices
Lab H: Enabling HTTP Access to Cisco IOS Devices
Appendix A: Cabling and Configuring a Frame Relay Switch for Two Routers
Appendix B: Cabling and Configuring a Frame Relay Switch for Three Routers

Related Articles

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

1 Comment
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Dan

This is absolutely fantastic

Back to top button