Lab 3-3: Using ACLs to filter IP based traffic
Visual Topology Command Line Command Description Interface loopback0 Creates an internal interface ip access-group acl name [in/out] Binds…
Month: July 2018
-
-
Lab 3-2: Device Hardening
Visual Topology Command Lis Command Description [no] cdp enable Enables or disables CDP on an interface show cdp…
-
Lab 3-1: Improving Device Security
Visual Topology Command Lis Command Description Access-class acl id [in/out] Access-class acl id [in/out] Access-list number permit ip…
-
Lab 2-2: Internet connections
Visual Topology Command Lis Command Description Access-list acl id permit network wildcard mask Creates a standard IP access…
-
Lab 2-1: Router startup and Initial Configuration
Visual Topology Command Lis Command Description Configure Terminal Enters global configuration mode. Copy run start Saves the dynamic…
-
Lab 1-2: Troubleshooting Switch Media Issues
Visual Topology Command Lis Command Description Configure Terminal Enters global configuration mode. Copy run start Saves the dynamic…
-
Lab 1-1: Switch Startup and Initial Configuration
Visual Topology Command Lis Command Description ? or help Lists available commands in your current mode Clock set…
